Products

Metal Coating (Ag、Al、Cr、Cu、Ti)

Metal Coating (Ag、Al、Cr、Cu、Ti)

Metal Coating (Ag、Al、Cr、Cu、Ti)

Description

Our company offers various Optical Coating Processing, such as Anti Finger Printing Coating, Metal Coating, Anti Fog Glass, Dichroic Filters, Anti Reflection Coating, Hard Coating and Anti Glare Coating, all with excellent quality.

  • Metal coatings are normally used on reflective products, as electromagnetic protection or decorative surface effects.

  • Yih Dar's Optical Coating Processing technology leads the industry. The highly reflective Silver Mirror Coating series of products can achieve reflectivity of over 98% and possess the characteristics of high reflection and low absorption which can reduce energy loss to less than 1% when reflecting a light source.

  • The Aluminum Mirror Coating series of products can achieve reflectivity of over 94%.

  • Yih Dar's Silver Mirror Coating possesses the characteristics of high heat resistance and high humidity resistance. Aluminum Mirror Coating possesses the metal characteristic of a large angle of reflection and is the best choice for optomechanical series mirrors.

  • Product specifications can be adjusted to actual customer requirements.
Product Application
Aluminum Mirror, Silver Mirror, Solar Reflector, Lamp Cup, BarCode Scanner

Fields of Application for Metal Coating (Ag, Al, Cr, Cu, Ti)
  • Projectors
  • Scanners
  • Printers
  • Surveillance cameras/CCD
  • Bar code Readers
  • Reflectors
  • EMI
Specification
Ag coating:Ravg≧98%@420~680nm、Rabs≧96%@420~680nm
Al coating:Ravg≧94%@450~650nm、Rabs≧92%@450~650nm
Material
Glass, Plastic (PC or PMMA)


Warranty
Company hereby warrants to Customer that the Products shall, after acceptance by Customer, be free from defects in material and workmanship under normal use, and shall, when properly used, provide the functions set forth in the agreed specification. In the event that Customer finds any above mentioned defects in the Products within ninety (90) days from the acceptance by Customer, (i) Customer will promptly notify Company in writing a detailed description of the alleged defects upon discovery of any defects in the Products, (ii) such Products are returned to Company factory, and (iii) Company's examination of such Products, according to its RMA procedure, reveals that such Products are indeed defective and defects are attributable solely to Company, then Company will, at its option, either repair, replace, or credit Customer up to the PO value for such defective Products.
Loading...